3-way Foil-Scrim-Kraft backing, combined with a transparent high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.
HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
2-way Foil-Scrim-Kraft backing, combined with a transparent high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.
HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
ASJ (All Service Jacket) backing, combined with a high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.
Mainly used for joint / seam sealing and patching of ASJ faced mechanical insulation system, and providing a matching appearance and vapor retarder integrity.
3-way Black Polypropylene-Scrim-Kraft backing, combined with a high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.
HVAC industry for joining and sealing Black Polypropylene-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; and repairing damaged PP-Scrim-Kraft Facing in metal building insulation.
Foil-PE Mesh backing (Closer PE Mesh), combined with high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.
HVAC industry for joining and sealing Foil-PE Mesh laminated fiberglass blanket / duct board / pipe section joints and seams; joining and sealing flexible air duct seams and connections.
Foil-Scrim backing (Foil: 18u / 2-way Scrim: 5x5mm), combined with a transparent high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.
HVAC industry for joining and sealing Foil-Scrim Facing laminated fiberglass blanket / duct board / pipe section joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
Foil-Scrim backing (Foil: 25u / 2-way Scrim: 5x5mm), combined with a transparent high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.
HVAC industry for joining and sealing Foil-Scrim Facing laminated fiberglass blanket / duct board / pipe section joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
3-way White Polypropylene-Scrim-Kraft backing, combined with a high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.
HVAC industry for joining and sealing White Polypropylene-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; and repairing damaged PP-Scrim-Kraft Facing in metal building insulation.
PRODUCT FORM & SIZE AVAILABLE
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")
Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 750m / 800m
IMPORTANT NOTE
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
STORAGE & SHELF LIFE: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).