PRODUCTS  > Double Sided Adhesive Tape  > DS PET Film Tape

DS PET Film Tape
bondtape product guide property
Product Guide
Product
Description
Application

DP9005G D/S PET Tape adopts BOPP film as carrier, coated with synthetic rubber-resin adhesive on both sides, and protected with glassine double-sided silicone release paper. It is mainly used for carpet fixing, foam laminating etc.

It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).

DT9005G D/S PET Tape adopts PET film as carrier, coated with synthetic rubber-resin adhesive on both sides, and protected with glassine double-sided silicone release paper. It is mainly used for carpet fixing, foam laminating etc.

It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).

DT10025G D/S PET Tape adopts PET film as carrier, coated with Solvent Acrylic adhesive on both sides, and protected with glassine double-sided silicone release paper. It is mainly used for carpet fixing, foam laminating etc.

It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).

DT10025W D/S PET Tape adopts PET film as carrier, coated with Solvent Acrylic adhesive on both sides, and protected with White PE Coated silicone release paper. It is mainly used for carpet fixing, foam laminating etc.

It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).

Typical Physical Properties
Product
Backing
Adhesive
Thickness Micron
Adhesion N/25mm
Tensile N/25mm
Elongation %
Service Temp°C
PET
Rubber-Resin
90
15
50
100
-20 ~ +60
PET
rubber-resin
90
15
70
100
-20 ~ +60
PET
Solvent Acrylic
100
15
75
100
-20 ~ +100
PET
Solvent Acrylic
100
15
75
100
-20 ~ +100

PRODUCT FORM & SIZE AVAILABLE

Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5")

Log Roll: 1060mm x 45M / 50M              Jumbo Roll: 1060mm x 500M

IMPORTANT NOTE

1. The data above are typical values only, and should not be used for specifications purpose.

2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.

STORAGE & SHELF LIFE

12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.

PRODUCT USE:

It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).