PRODUCT DESCRIPTION

A nominal 100 micron (4.0 mil) durable aluminum foil backing, combined with a high performance synthetic rubber-resin adhesive,, protected by an easy-release silicone release paper.

FEATURES

• 100u (4.0 mil) durable aluminum foil backing, long-term protection both indoors and outdoors

• Heat and light reflective, flame resistant.

• High quality adhesive, long aging and weather resistance.

• Excellent water vapor barrier and air-leakage protection.

TYPICAL PHYSICAL PROPERTIES

TYPICAL APPLICATIONS: This product can be used as a water proofing vapor barrier and air leakage protection. High reflectivity assures effective heat light interference and electrical isolation shielding. Excellent protection for masking operations in electroplating and paint stripping. 4.0 mil foil protects outdoor cable splices, metal patching and sound dampening applications.

PRODUCT FORM & SIZE AVAILABLE

Cut Roll:  48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")

Log Roll: 1200mm x 45 / 50m        Jumbo Roll: 1200mm x 800m / 1000m

IMPORTANT NOTE

1. The data above are typical values only, and should not be used for specifications purpose.

2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.

STORAGE & SHELF LIFE: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.

SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.

PRODUCT USE: It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).