PRODUCT DESCRIPTION

A nominal 75 micron (3.0 mil) durable aluminum foil backing, combined with a high performance synthetic rubber-resin adhesive,, protected by an easy-release silicone release paper.

FEATURES

• 75u (3.0 mil) durable aluminum foil backing, long-term protection both indoors and outdoors

• Heat and light reflective, flame resistant.

• High quality adhesive, long aging and weather resistance.

• Excellent water vapor barrier and air-leakage protection.

TYPICAL PHYSICAL PROPERTIES

TYPICAL APPLICATIONS: This product can be used as a water proofing vapor barrier and air leakage protection. High reflectivity assures effective heat light interference and electrical isolation shielding. Excellent protection for masking operations in electroplating and paint stripping. 3 mil foil protects outdoor cable splices, metal patching and sound dampening applications.

PRODUCT FORM & SIZE AVAILABLE

Cut Roll:  48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")

Log Roll: 1200mm x 45 / 50m        Jumbo Roll: 1200mm x 800m / 1000m

IMPORTANT NOTE

1. The data above are typical values only, and should not be used for specifications purpose.

2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.

STORAGE & SHELF LIFE: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.

SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.

PRODUCT USE: It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).