DA12025W D/S Tissue Tape adopts non-woven tissue as carrier, coated with aggressive solvent acrylic adhesive on both sides, and protected with easy release white double-sided silicone release paper.
DA12025W D/S Tissue Tape is mainly for foam fixing and lamination, and also suitable for general bonding, bag sealing, photos sticking, envelop sealing, light shopping bag making etc.
TYPICAL PHYSICAL PROPERTIES
PROPERTIES |
METRIC |
ENGLISH |
TEST METHOD |
Total Thickness |
120 Micron |
4.8 Mil |
PSTC-133 / ASTM D 3652 |
Adhesion to Steel |
20 N/25mm |
72.0 Oz./In. |
PSTC-101 / ASTM D 3330 |
Tack Rolling Ball |
5 cm |
4.0 In. |
PSTC-6 / ASTM D 3121 |
Tensile Strength |
40 N/25mm |
3.5 Lb/In |
PSTC-131 / ASTM D 3759 |
Elongation |
3.5 % |
3.5 % |
PSTC-131 / ASTM D 3759 |
Service Temperature |
-20 ~ +100 °C |
-4 ~ +212 °F |
------------ |
Applying Temperature |
+10 ~ 40 °C |
+50 ~ +105 °F |
------------ |
PRODUCT FORM & AVAILABLE SIZE
Log Roll: 1020mm x 45M / 50M Jumbo Roll: 1020mm x 800M / 500M / 250M
Slit Roll: Width 3mm up / Length: Up to 100M
IMPORTANT NOTE
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
STORAGE & SHELF LIFE:
12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
SUGGESTIONS FOR PRODUCT APPLICATION:
It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).