PRODUCT DESCRIPTION
DT10025G D/S PET Tape adopts PET film as carrier, coated with Solvent Acrylic adhesive on both sides, and protected with glassine double-sided silicone release paper. It is mainly used for carpet fixing, foam laminating etc.
TYPICAL PHYSICAL PROPERTIES
PROPERTIES |
METRIC |
ENGLISH |
TEST METHOD |
Total Thickness |
100 Micron |
4.0 Mil |
PSTC-133 / ASTM D 3652 |
Adhesion to Steel |
15 N/25mm |
54 Oz./In. |
PSTC-101 / ASTM D 3330 |
Tack Rolling Ball |
10 cm |
4.0 In. |
PSTC-6 / ASTM D 3121 |
Tensile Strength |
75N/25mm |
17 Lb/In |
PSTC-131 / ASTM D 3759 |
Elongation |
100 % |
100 % |
PSTC-131 / ASTM D 3759 |
Service Temperature |
-20 ~ +100 °C |
-4 ~ +212 °F |
------------ |
Applying Temperature |
+10 ~ 40 °C |
+50 ~ +105 °F |
------------ |
PRODUCT FORM & SIZE AVAILABLE
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5")
Log Roll: 1020mm/1220mm x 45M / 50M Jumbo Roll: 1020mm/1220mm x 500M
IMPORTANT NOTE
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
STORAGE & SHELF LIFE
12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
PRODUCT USE:
It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).