PRODUCT DESCRIPTION
DT10025W D/S PET Tape adopts PET film as carrier, coated with Solvent Acrylic adhesive on both sides, and protected with White PE Coated silicone release paper. It is mainly used for carpet fixing, foam laminating etc.
TYPICAL PHYSICAL PROPERTIES
PROPERTIES |
METRIC |
ENGLISH |
TEST METHOD |
Total Thickness |
100 Micron |
4.0 Mil |
PSTC-133 / ASTM D 3652 |
Adhesion to Steel |
15 N/25mm |
54 Oz./In. |
PSTC-101 / ASTM D 3330 |
Tack Rolling Ball |
10 cm |
4.0 In. |
PSTC-6 / ASTM D 3121 |
Tensile Strength |
75N/25mm |
17 Lb/In |
PSTC-131 / ASTM D 3759 |
Elongation |
100 % |
100 % |
PSTC-131 / ASTM D 3759 |
Service Temperature |
-20 ~ +100 °C |
-4 ~ +212 °F |
------------ |
Applying Temperature |
+10 ~ 40 °C |
+50 ~ +105 °F |
------------ |
PRODUCT FORM & SIZE AVAILABLE
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5")
Log Roll: 1020mm/1220mm x 45M / 50M Jumbo Roll: 1020mm/1220mm x 500M
IMPORTANT NOTE
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
STORAGE & SHELF LIFE
12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
PRODUCT USE:
It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).