PRODUCTS > Products > Vapor Barrier (Laminated Insulation Facing) > Heat-Sealing Foil-Scrim-Kraft Facing
FSKE-7161B
Product & Application
An improved commercial grade Heat-Sealing Foil-Scrim-Kraft Facing with 2-way scrim and 60gsm Kraft as well as heat-activated polyethylene on its back. Suitable for in-line heating and lamination with glasswool and rockwool. No need applying extra adhesive. Well improved on eliminating Air-Bubble on foil surface.
Facing Composition
|
Facing Composition |
Description |
Value (English) |
Value (Metric) |
|
Foil |
Aluminum |
0.28 mil |
7 micron |
|
Reinforcing - MD |
Fiberglass |
1/2 inch spacing |
12.5mm spacing |
|
Reinforcing - XD |
Fiberglass |
1/2 inch spacing |
12.5mm spacing |
|
Adhesive |
Polyethylene |
------ |
------ |
|
Kraft |
Natural |
36.6 lbs / 3000 ft2 |
60gsm |
|
Heat-Activated Coating |
Polyethylene |
0.8 mil |
20 micron |
Typical Physical Properties
|
Physical Properties |
Test Method |
Value (English) |
Value (Metric) |
|
Basis Weight |
Scale |
23 lbs / 1000 ft2 |
112 gsm |
|
Permeance (WVTR) |
ASTM E96, Procedure A |
0.02 perm |
1.15 ng/N.s |
|
Tensile Strength - MD |
ASTM D828 |
31.8 lbs/In |
140 N/25mm |
|
Tensile Strength - XD |
ASTM D828 |
17 lbs/In |
75 N/25mm |
|
Burst Strength |
ASTM D774 |
47.8 psi |
33 N/cm2 |
|
Low Temperature Resistance |
ASTM D1790 4 hrs @-40 °F (- 40 °C) |
Remains Flexible No Delamination |
Remains Flexible No Delamination |
|
High Temperature Resistance |
ASTM D1790 4 hrs @ +240 °F (+116 °C) |
Remains Flexible No Delamination |
Remains Flexible No Delamination |
|
Dimensional Stability |
ASTM D1204 @ 150F (65C) |
Less than 0.5% |
Less than 0.5% |
|
Emissivity |
ASTM E408 |
0.03 |
0.03 |
Available Roll Width: 1.0m, 1.2m, 1.25m, 1.30m，1.35m
Remarks
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Log Roll: ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature, kept away from wet and heat source.
4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
苏公网安备 32028102000993号