PRODUCTS > Products > Vapor Barrier (Laminated Insulation Facing) > PP-Scrim-Kraft Facing & All Service Jacket
WPSK-453A
Description & Application
Utility Grade Polypropylene-Scrim-Kraft (PSK) Facing. It consists of 38u white PP film, closer 3-way fiberglass scrim, 30gsm Kraft paper. Excellent facing and vapor barrier of glasswool blanket / board. Combine with glasswool blanket, it is widely used for roof and wall insulation of metal building. Very good for air-conditioning ductwork thermal insulation when laminating on glasswool blanket / board.
Product Construction
|
Facing Composition |
Description |
Value (English) |
Value (Metric) |
|
White Film |
Polypropylene |
1.5 mil |
38 micron |
|
Reinforcing - MD |
Fiberglass |
5 / inch |
20 / 100mm |
|
Reinforcing - XD |
Fiberglass |
4 / inch |
16 / 100mm |
|
Adhesive |
Polyethylene |
------ |
------ |
|
Kraft |
Natural |
23.3 lbs / 3000 ft2 |
38 gsm |
Typical Physical Properties
|
Physical Properties |
Test Method |
Value (English) |
Value (Metric) |
|
Basis Weight |
Scale |
17.4 lbs / 1000 ft2 |
85 gsm |
|
Permeance (WVTR) |
ASTM E96, Procedure A |
0.02 perm |
1.15 ng/N.s |
|
Tensile Strength - MD |
ASTM D828 |
42 lbs/In |
185 N/25mm |
|
Tensile Strength - XD |
ASTM D828 |
27.3 lbs/In |
120 N/25mm |
|
Burst Strength |
ASTM D774 |
72.5 psi |
50 N/cm2 |
|
Low Temperature Resistance |
ASTM D1790 4 hrs @ -40 °F (- 40 °C) |
Remains Flexible No Delamination |
Remains Flexible No Delamination |
|
High Temperature Resistance |
ASTM D1790 4 hrs @ +240 °F (+116 °C) |
Remains Flexible No Delamination |
Remains Flexible No Delamination |
|
Dimensional Stability |
ASTM D1204 @ 150F (65C) |
Less than 0.5% |
Less than 0.5% |
|
Light Reflectance |
ASTM C523 |
85% |
85% |
Available Roll Width: 1.25 m, 1.30m, 1.37m
Remarks
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Log Roll: ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature, kept away from wet and heat source.
4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
苏公网安备 32028102000993号